Skip to main content

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 300 total)
  • Author
    Posts
  • in reply to: Anyone know what might cause the plant to look like this? #1716
    mrgrowit
    Keymaster

    Are they recovering or are you still seeing issues after the flush? I know quite a few people that like to run a bit lower of pH than that so if you’re not seeing a recovery you may want to try that.

    in reply to: Light Help #1715
    mrgrowit
    Keymaster

    I’m glad to hear they are recovering!

    in reply to: Errors in your grow light article #1714
    mrgrowit
    Keymaster

    I just double checked and the PPF & PPFD information was pulled correctly. Remember, PPFD is measured as µmol/m²/s while PPF is measured as µmol/s … That might be where the confusion is. Or the confusion may be because the PPFD I’ve listed is the dead-center reading they show on the grow light’s PAR chart.

    Here is an example… In that article under the HLG 100 V2, I’ve listed the PPFD as 640 µmol/m²/s and the PPF as 225 µmol/s… Those numbers come directly from one of the trusted sources linked within the article. Link to the grow light listing to confirm those numbers: https://bit.ly/3uXxgxk

    Hope this helps.

    in reply to: Glad to be back! #1673
    mrgrowit
    Keymaster

    Without the PPM measurement, we are just guessing what the problem could be. It could be too low of PPM indicating it needs a feeding, or too high of PPM causing a nutrient lockout. Without the pH measurement, we don’t know if the medium is in the acceptable range for nutrient uptake. If the pH in the medium is too high or too low, you could get nutrient lockout and see deficiencies.

    But it looks like you’re close to harvest so I’m guessing you’ll just ride it out?

    Cheers man!

    in reply to: Worm castings for both indoor and outdoor growing #1672
    mrgrowit
    Keymaster

    Thanks for the guest suggestion! I’ll add them to the list of potential guests.

    in reply to: Anyone know what might cause the plant to look like this? #1671
    mrgrowit
    Keymaster

    What pH and PPM are you running in that hydro setup?

    in reply to: Light Help #1670
    mrgrowit
    Keymaster

    What nutrients have you been feeding the plant and how often? Also, what is the pH and PPM of the soil runoff?

    in reply to: Diagnosis Help #1668
    mrgrowit
    Keymaster

    What is the pH and PPM of the soil runoff? Sounds like you’re growing with organic inputs; what fertilizer have you fed and when? Could be anything from a lack of nutrition, imbalance in the soil, pH being off, or something else.

    in reply to: Your Thoughts #1665
    mrgrowit
    Keymaster

    I concur with @CamZ

    mrgrowit
    Keymaster

    I’d rock two lights with a flowering coverage area in that space – one for each side of the grow space. Here’s my picks for the best LED grow lights for that space:

    Best LED Grow Lights 2023 | 4×4 Coverage Area

    in reply to: Glad to be back! #1659
    mrgrowit
    Keymaster

    Hard to tell you for sure. A soil runoff pH and PPM can help us see if things are in their ideal ranges or not.

    in reply to: Possible Potassium Toxicity in early Veg (day 25). #1658
    mrgrowit
    Keymaster

    How much fertilizer did you use and when did you apply it? By just looking at it, I suspect magnesium deficiency:

    Magnesium Deficiency in Cannabis Plants

    in reply to: How do you lower ppm before harvest #1657
    mrgrowit
    Keymaster

    How does the plant look? You might be able to just ride it out if the plant is fine since you’re so close to harvest. But if you think it needs a flush, go for it.

    in reply to: Deficiency or toxicity #1656
    mrgrowit
    Keymaster

    What is the pH and PPM of the soil runoff?

    in reply to: Just Sharing the 2×4 #1655
    mrgrowit
    Keymaster

    Looking great so far! Nice job

Viewing 15 posts - 271 through 285 (of 300 total)